Simulating PDT of port-wine stains in the in vivo chicken wattle model using Hemoporfin and radiation at 532 nm: Comparison of a LED and a laser source.

Port-wine stain (PWS) birthmarks are congenital capillary malformations occurring in 0.3 %∼0.5 % of newborns. Hemoporfin-mediated vascular-acting photodynamic therapy (Hemoporfin PDT) is an emerging option for treating PWS. This in vivo study aimed to compare laser and light-emitting diodes (LED) as light source for Hemoporfin PDT. Chicken wattles were used as the animal model. Color and histopathological changes were evaluated after combining Hemoporfin with KTP laser or LED light source of 532 nm at the same doses. Both PDT approaches could induce significant vascular injury and color bleaching. Although the use of the laser resulted in a greater vascular clearance, the LED showed more uniform distribution both in the beam profiles and tissue reaction and exhibited better safety. This in vivo study suggests that the LED is a favorable choice for larger PWS lesion.

Guidelines derived from biomineralized tissues for design and construction of high-performance biomimetic materials: from weak to strong.

Living organisms in nature have undergone continuous evolution over billions of years, resulting in the formation of high-performance fracture-resistant biomineralized tissues such as bones and teeth to fulfill mechanical and biological functions, despite the fact that most inorganic biominerals that constitute biomineralized tissues are weak and brittle. During the long-period evolution process, nature has evolved a number of highly effective and smart strategies to design chemical compositions and structures of biomineralized tissues to enable superior properties and to adapt to surrounding environments. Most biomineralized tissues have hierarchically ordered structures consisting of very small building blocks on the nanometer scale (nanoparticles, nanofibers or nanoflakes) to reduce the inherent weaknesses and brittleness of corresponding inorganic biominerals, to prevent crack initiation and propagation, and to allow high defect tolerance. The bioinspired principles derived from biomineralized tissues are indispensable for designing and constructing high-performance biomimetic materials. In recent years, a large number of high-performance biomimetic materials have been prepared based on these bioinspired principles with a large volume of literature covering this topic. Therefore, a timely and comprehensive review on this hot topic is highly important and contributes to the future development of this rapidly evolving research field. This review article aims to be comprehensive, authoritative, and critical with wide general interest to the science community, summarizing recent advances in revealing the formation processes, composition, and structures of biomineralized tissues, providing in-depth insights into guidelines derived from biomineralized tissues for the design and construction of high-performance biomimetic materials, and discussing recent progress, current research trends, key problems, future main research directions and challenges, and future perspectives in this exciting and rapidly evolving research field.

Littoral cell angioma of the spleen: A study of 10 cases case series and literature review.

BACKGROUND: Current study aimed to investigate the clinical characterization, differential diagnosis, and treatment of splenic littoral cell angioma (LCA). METHODS: A retrospective analysis was performed for 10 LCA cases admitted to Huzhou Central Hospital from 2007 to 2023, for clinical manifestations, hematological tests, imaging features, pathological features, treatment methods, and prognosis along with the relevant literature was also reviewed. RESULTS: During examinations, no specific clinical manifestations and hematological abnormalities were seen in all 10 cases of LCA. Imaging observations depicted single or even multiple spherical lesions in the spleen. Plains shown by computed tomography (CT) were found somewhat equal or slightly lower in density. On the other hand, magnetic resonance imaging (MRI) plain scans viz. T1 weighted image showed equal low and mixed signals while T2-weighted showed high and low mixed signals. Moreover, punctate low signals could be seen in high signals named "freckle sign" in MRI scans. On contrast-enhanced CT scans, the enhancement of the lesions was not obvious in the arterial phase, and some of the lesions showed edged ring-like enhancements and "filling lake" progressive enhancement during the venous phase and delayed phase. In multiple lesions, the number of enhanced scan lesions showed a variable changing pattern "less-more-less." MRI-enhanced scan showed the characteristics of "fast in and slow out." Microscopic examinations identified tumor tissue actually composed of sinus-like lacunae that anastomosed with each other in the form of a network. Furthermore, cystic expansion and pseudopapillary protrusions were also seen in the dilated sinus cavity which was lined with single-layer endothelial cells having conspicuous cytoplasmic hemosiderin. High immunophenotypic expressions of vascular endothelial cell phenotype (CD31, CD34, FVIII) and tissue cell phenotype (CD68) were also seen. Total and partial splenectomy were performed in 8 and 2 patients, respectively, and follow-up examinations showed survival in all patients with no recurrence. CONCLUSION: LCA is a rare splenic benign lesion with atypical clinical manifestations. CT and MRI imaging are important tools in preoperative diagnosis based on pathomorphological and immunohistochemical examinations. Splenectomy is a superior therapeutic choice with significant impacts and prognosis.

Functionalized chitosan hydrogel promotes osseointegration at the interface of3D printed titanium alloy scaffolds.

Autogenous bone transplantation is a prevalent clinical method for addressing bone defects. However, the limited availability of donor bone and the morbidity associated with bone harvesting have propelled the search for suitable bone substitutes. Bio-inspired scaffolds, particularly those fabricated using electron beam melting (EBM) deposition technology, have emerged as a significant advancement in this field. These 3D-printed titanium alloy scaffolds are celebrated for their outstanding biocompatibility and favorable elastic modulus. Thermosensitive chitosan hydrogel, which transitions from liquid to solid at body temperature, serves as a popular carrier in bone tissue engineering. Icariin (ICA), known for its efficacy in promoting osteoblast differentiation from bone marrow mesenchymal stem cells (BMSCs), plays a crucial role in this context. We developed a system combining a 3D-printed titanium alloy with a thermosensitive chitosan hydrogel, capable of local bone regeneration and integration through ICA delivery. Our in vitro findings reveal that this system can gradually release ICA, demonstrating excellent biocompatibility while fostering BMSC proliferation and osteogenic differentiation. Immunohistochemistry and Micro-CT analyses further confirm the effectiveness of the system in accelerating in vivo bone regeneration and enhancing osseointegration. This composite system lays a significant theoretical foundation for advancing local bone regeneration and integration.

Neuronal activity in the anterior paraventricular nucleus of thalamus positively correlated with sweetener consumption in mice.

Although the brain can discriminate between various sweet substances, the underlying neural mechanisms of this complex behavior remain elusive. This study examines the role of the anterior paraventricular nucleus of the thalamus (aPVT) in governing sweet preference in mice. We fed the mice six different diets with equal sweetness for six weeks: control diet (CD), high sucrose diet (HSD), high stevioside diet (HSSD), high xylitol diet (HXD), high glycyrrhizin diet (HGD), and high mogroside diet (HMD). The mice exhibited a marked preference specifically for the HSD and HSSD. Following consumption of these diets, c-Fos expression levels in the aPVT were significantly higher in these two groups compared to the others. Utilizing fiber photometry calcium imaging, we observed rapid activation of aPVT neurons in response to sucrose and stevioside intake, but not to xylitol or water. Our findings suggest that aPVT activity aligns with sweet preference in mice, and notably, stevioside is the sole plant-based sweetener that elicits an aPVT response comparable to that of sucrose.

Adenoid cystic carcinoma of the Bartholin's gland is underpinned by MYB- and MYBL1- rearrangements.

OBJECTIVE: Adenoid cystic carcinoma (AdCC) of the Bartholin's gland (AdCC-BG) is a very rare gynecologic vulvar malignancy. AdCC-BGs are slow-growing but locally aggressive and are associated with high recurrence rates. Here we sought to characterize the molecular underpinning of AdCC-BGs. METHODS: AdCC-BGs (n = 6) were subjected to a combination of RNA-sequencing, targeted DNA-sequencing, reverse-transcription PCR, fluorescence in situ hybridization (FISH) and MYB immunohistochemistry (IHC). Clinicopathologic variables, somatic mutations, copy number alterations and chimeric transcripts were assessed. RESULTS: All six AdCC-BGs were biphasic, composed of ductal and myoepithelial cells. Akin to salivary gland and breast AdCCs, three AdCC-BGs had the MYB::NFIB fusion gene with varying breakpoints, all of which were associated with MYB overexpression by IHC. Two AdCC-BGs were underpinned by MYBL1 fusion genes with different gene partners, including MYBL1::RAD51B and MYBL1::EWSR1 gene fusions, and showed MYB protein expression. Although the final AdCC-BG studied had MYB protein overexpression, no gene fusion was identified. AdCC-BGs harbored few additional somatic genetic alterations, and only few mutations in cancer-related genes were identified, including GNAQ, GNAS, KDM6A, AKT1 and BCL2, none of which were recurrent. Two AdCC-BGs, both with a MYB::NFIB fusion gene, developed metastatic disease. CONCLUSIONS: AdCC-BGs constitute a convergent phenotype, whereby activation of MYB or MYBL1 can be driven by the MYB::NFIB fusion gene or MYBL1 rearrangements. Our observations further support the notion that AdCCs, irrespective of organ site, constitute a genotypic-phenotypic correlation. Assessment of MYB or MYBL1 rearrangements may be used as an ancillary marker for the diagnosis of AdCC-BGs.

Identification and Functional Characterization of Oxidosqualene Cyclases from Medicinal Plant Hoodia gordonii.

Oxidosqualene cyclases (OSCs) are the key enzymes accountable for the cyclization of 2,3-oxidosqualene to varied triterpenoids and phytosterols. Hoodia gordonii (from the family Apocynaceae), a native of the Kalahari deserts of South Africa, Namibia, and Botswana, is being sold as a prevalent herbal supplement for weight loss. The appetite suppressant properties are attributed to P57AS3, an oxypregnane steroidal glycoside. At the molecular level, the enzymes involved in the biosynthesis of triterpenes and phytosterols from H. gordonii have not been previously reported. In the current study, predicted transcripts potentially encoding oxidosqualene cyclases were recognized first by searching publicly available H. gordonii RNA-seq datasets. Two OSC-like sequences were selected for functional analysis. A monofunctional OSC, designated HgOSC1 which encodes lupeol synthase, and HgOSC2, a multifunctional cycloartenol synthase forming cycloartenol and other products, were observed through recombinant enzyme studies. These studies revealed that distinct OSCs exist for triterpene formation in H. gordonii and provided opportunities for the metabolic engineering of specific precursors in producing phytosterols in this plant species.

Hypothalamic CRF neurons facilitate brain reward function.

Aversive stimuli activate corticotropin-releasing factor (CRF)-expressing neurons in the paraventricular nucleus of hypothalamus (PVNCRF neurons) and other brain stress systems to facilitate avoidance behaviors. Appetitive stimuli also engage the brain stress systems, but their contributions to reward-related behaviors are less well understood. Here, we show that mice work vigorously to optically activate PVNCRF neurons in an operant chamber, indicating a reinforcing nature of these neurons. The reinforcing property of these neurons is not mediated by activation of the hypothalamic-pituitary-adrenal (HPA) axis. We found that PVNCRF neurons send direct projections to the ventral tegmental area (VTA), and selective activation of these projections induced robust self-stimulation behaviors, without activation of the HPA axis. Similar to the PVNCRF cell bodies, self-stimulation of PVNCRF-VTA projection was dramatically attenuated by systemic pretreatment of CRF receptor 1 or dopamine D1 receptor (D1R) antagonist and augmented by corticosterone synthesis inhibitor metyrapone, but not altered by dopamine D2 receptor (D2R) antagonist. Furthermore, we found that activation of PVNCRF-VTA projections increased c-Fos expression in the VTA dopamine neurons and rapidly triggered dopamine release in the nucleus accumbens (NAc), and microinfusion of D1R or D2R antagonist into the NAc decreased the self-stimulation of these projections. Together, our findings reveal an unappreciated role of PVNCRF neurons and their VTA projections in driving reward-related behaviors, independent of their core neuroendocrine functions. As activation of PVNCRF neurons is the final common path for many stress systems, our study suggests a novel mechanism underlying the positive reinforcing effect of stressful stimuli.

Channel semantic mutual learning for visible-thermal person re-identification.

Visible-infrared person re-identification (VI-ReID) is a cross-modality retrieval issue aiming to match the same pedestrian between visible and infrared cameras. Thus, the modality discrepancy presents a significant challenge for this task. Most methods employ different networks to extract features that are invariant between modalities. While we propose a novel channel semantic mutual learning network (CSMN), which attributes the difference in semantics between modalities to the difference at the channel level, it optimises the semantic consistency between channels from two perspectives: the local inter-channel semantics and the global inter-modal semantics. Meanwhile, we design a channel-level auto-guided double metric loss (CADM) to learn modality-invariant features and the sample distribution in a fine-grained manner. We conducted experiments on RegDB and SYSU-MM01, and the experimental results validate the superiority of CSMN. Especially on RegDB datasets, CSMN improves the current best performance by 3.43% and 0.5% on the Rank-1 score and mINP value, respectively. The code is available at https://github.com/013zyj/CSMN.

Salt-rejecting 3D cone flowing evaporator based on bilayer photothermal paper for high-performance solar seawater desalination.

Solar energy-driven water evaporation technology is a promising, low-cost and sustainable approach to alleviate the global clean water shortage, but usually suffers from low water evaporation rate and severe salt deposition on the water evaporation surface. In this work, a hydrophilic bilayer photothermal paper-based three-dimensional (3D) cone flowing evaporator was designed and prepared for stable high-performance seawater desalination with excellent salt-rejecting ability. The as-prepared bilayer photothermal paper consisted of MXene (Ti3C2Tx) and HAA (ultralong hydroxyapatite nanowires, poly(acrylic acid), and poly(acrylic acid-2-hydroxyethyl ester)). The accordion-like multilayered MXene acted as the efficient solar light absorber, and ultralong hydroxyapatite (HAP) nanowires served as the thermally insulating and supporting skeleton with a porous networked structure. A siphon effect-driven unidirectional fluid transportation unit in the 3D cone flowing evaporator could guide the concentrated saline flowing away from the evaporating surface to prevent salt deposition on the evaporation surface, avoiding severe deterioration of the performance in solar water evaporation. Furthermore, combining high solar light absorption and high photothermal conversion efficiencies, low water evaporation enthalpy (1838 ±â€¯11 J g-1), and additional energy taken from the ambient environment, the as-prepared cone flowing evaporator exhibited a high water evaporation rate of 3.22 ±â€¯0.20 kg m-2 h-1 for real seawater under one sun illumination (1 kW m-2), which was significantly higher than many values reported in the literature. This study provides an effective approach for designing high-performance solar energy-driven water evaporators for sustainable seawater desalination and wastewater purification.

Ultralong Nanowires of Cadmium Phosphate Hydroxide Synthesized Using a Cadmium Oleate Precursor Hydrothermal Method and Sulfidation Conversion to Ultralong CdS Nanowires.

Ultralong nanowires with ultrahigh aspect ratios exhibit high flexibility, and they are promising for applications in various fields. Herein, a cadmium oleate precursor hydrothermal method is developed for the synthesis of ultralong nanowires of cadmium phosphate hydroxide. In this method, water-soluble cadmium salt is used as the cadmium source, water-soluble phosphate is used as the phosphorus source, and sodium oleate is adopted as a reactant to form cadmium oleate precursor and as a structure-directing agent. By using this method, ultralong nanowires of cadmium phosphate hydroxide are successfully synthesized using CdCl2, sodium oleate, and NaH2PO4 as reactants in an aqueous solution by hydrothermal treatment at 180 °C for 24 h. In addition, a new type of flexible fire-resistant inorganic paper with good electrical insulation performance is fabricated using ultralong nanowires of cadmium phosphate hydroxide. As an example of the extended application of this synthetic method, ultralong nanowires of cadmium phosphate hydroxide can be converted to ultralong CdS nanowires through a convenient sulfidation reaction. In this way, ultralong CdS nanowires are successfully synthesized by simple sulfidation of ultralong nanowires of cadmium phosphate hydroxide under mild conditions. The as-prepared ultralong nanowires of cadmium phosphate hydroxide are promising for applications as the precursors and templates for synthesizing other inorganic ultralong nanowires and have wide applications in various fields.

Advanced Synthetic Scaffolds Based on 1D Inorganic Micro-/Nanomaterials for Bone Regeneration.

Inorganic nanoparticulate biomaterials, such as calcium phosphate and bioglass particles, with chemical compositions similar to that of the inorganic component of natural bone, and hence having excellent biocompatibility and bioactivity, are widely used for the fabrication of synthetic bone graft substitutes. Growing evidence suggests that structurally anisotropic, or 1D inorganic micro-/nanobiomaterials are superior to inorganic nanoparticulate biomaterials in the context of mechanical reinforcement and construction of self-supporting 3D network structures. Therefore, in the past decades, efforts have been devoted to developing advanced synthetic scaffolds for bone regeneration using 1D micro-/nanobiomaterials as building blocks. These scaffolds feature extraordinary physical and biological properties, such as enhanced mechanical properties, super elasticity, multiscale hierarchical architecture, extracellular matrix-like fibrous microstructure, and desirable biocompatibility and bioactivity, etc. In this review, an overview of recent progress in the development of advanced scaffolds for bone regeneration is provided based on 1D inorganic micro-/nanobiomaterials with a focus on their structural design, mechanical properties, and bioactivity. The promising perspectives for future research directions are also highlighted.

1064nm Nd:YAG laser promotes chondrocytes regeneration and cartilage reshaping by upregulating local estrogen levels.

Cartilage is frequently used as a scaffolds for repairing and reconstructing body surface organs. However, after successful plastic surgery, transplanted cartilage scaffolds often exhibit deformation and absorption over time. To enhance the shaping stability of cartilage scaffolds and improve patients' satisfaction after reconstructions, we employed the ear folding models in New Zealand rabbits to confirm whether the 1064nm neodymium-doped yttrium aluminum garnet (Nd:YAG) laser could promote cartilage reshaping. There was an increase in collagen and aromatase (Cyp19) expression within the ear cartilage after laser treatment. Moreover, we have found that the Cyp19 inhibitor can inhibit the laser's effect on cartilage shaping and reduce collagen and Cyp19 expression. The overall findings suggest that treatment with 1064nm Nd:YAG laser irradiation can enhance estrogen levels in local cartilage tissues by upregulating Cyp19 expression in chondrocytes through photobiomodulation, thereby promoting the proliferation and collagen secretion of chondrocytes to improve cartilage reshaping and stability.

Deubiquitinating enzyme OTUD4 regulates metastasis in triple-negative breast cancer by stabilizing Snail1.

Metastasis is the primary cause of cancer-related deaths and remains poorly understood. Deubiquitinase OTU domain containing 4 (OTUD4) has been reported to regulate antiviral immune responses and resistance to radio- or chemo-therapies in certain cancers. However, the role of OTUD4 in cancer metastasis remain unknown. Here, we demonstrate that the depletion of OTUD4 in triple-negative breast cancer (TNBC) cells markedly suppress cell clonogenic ability, migration, invasion and cancer stem cell population in vitro as well as metastasis in vivo. Mechanistically, the tumor promoting function of OTUD4 is mainly mediated by deuiquitinating and stabilizing Snail1, one key transcriptional factor in the epithelial-mesenchymal transition. The inhibitory effect of targeting OTUD4 could be largely reversed by the reconstitution of Snail1 in OTUD4-deficient cells. Overall, our study establishes the OTUD4-Snail1 axis as an important regulatory mechanism of breast cancer metastasis and provides a rationale for potential therapeutic interventions in the treatment of TNBC.

Naringin acts as a TRPV1 antagonist to attenuate UVB-induced senescence and damage in HaCaT cells.

This study aimed to explore the mechanism of naringin (Nar) in alleviating ultraviolet B (UVB)-induced HaCaT cell senescence and damage. Human keratinocytes (HaCaT cells) were divided into control, UVB, UVB + Nar, UVB + Cap, and UVB + Nar + Cap groups. Analysis was performed using the MTT assay to assess cell viability, flow cytometry to measure the apoptosis level, SA-ß-Gal staining to observe cellular senescence, and Western blot to assess protein levels of TRPV1, p16, p53, p21, matrix metalloproteinase (MMP)-1, and MMP-9. Both UVB irradiation and capsaicin (Cap) treatment upregulated the expression of TRPV1 in HaCaT cells, inhibited cell proliferation, promoted apoptosis, and increased the expression of p16, p53, p21, MMP-1, and MMP-9. Nar treatment reversed the above effects via inhibition of TRPV1 expression, thereby relieving senescence and cell damage induced by UVB irradiation. Taken together, these findings suggest that Nar can reduce UVB-induced senescence and damage in HaCaT cells by acting as an antagonist of TRPV1.

Genomic profiling of primary and metastatic thyroid cancers.

The genetic repertoire of primary thyroid cancers (TCs) is well documented, but there is a considerable lack of molecular profiling in metastatic TCs. Here, we retrieved and analyzed the molecular and clinical features of 475 primary and metastatic TCs subjected to targeted DNA sequencing, from the cBioPortal database. The cohort included primary and metastatic samples from 276 papillary thyroid carcinomas (PTCs), 5 follicular thyroid carcinomas, 22 Hürthle cell carcinomas (HCCs), 127 poorly differentiated thyroid carcinomas (PDTCs), 30 anaplastic thyroid carcinomas (ATCs) and 15 medullary thyroid carcinomas. The ATCs had the highest tumor mutational burden and the HCCs the highest fraction of the genome altered. Compared to primary PTCs, the metastases had a significantly higher frequency of genetic alterations affecting TERT (51% vs 77%, P < 0.001), CDKN2A (2% vs 10%, P < 0.01), RET (2% vs 7%, P < 0.05), CDKN2B (1% vs 6%, P < 0.05) and BCOR (0% vs 4%, P < 0.05). The distant metastases had a significantly lower frequency of BRAF (64% vs 85%, P < 0.01) and a significantly higher frequency of NRAS (13% vs 3%, P < 0.05) hotspot mutations than the lymph node metastases. Metastases from HCCs and PDTCs were found to be enriched for NF1 (29%) and TP53 (18%) biallelic alterations, respectively. The frequency of subclonal mutations in ATCs was significantly higher than in PTCs (43% vs 25%, P < 0.01) and PDTCs (43% vs 22%, P < 0.01). Metastatic TCs are enriched in clinically informative genetic alterations such as RET translocations, BRAF hotspot mutations and NF1 biallelic losses that may be explored therapeutically.

Synergistically regulating the separator pore structure and surface property toward dendrite-free and high-performance aqueous zinc-ion batteries.

As an emerging electrochemical device, aqueous zinc-ion batteries (ZIBs) present promising potential in safe and large-scale energy storage. However, the large pores of commercial glass fiber (GF) separators result in uneven Zn2+ ion flux, leading to severe dendrite growth issues of Zn metal anodes. Herein, we integrated a multifunctional layer on the GF separator that can synergistically regulate the pore feature and surface property of commercial GF separators. Such modification layer, composed of nanocellulose and SiO2 nanoparticles, exhibited uniform nanoporous structure and abundant negatively charged polar functional groups. These features allow regulating the distribution of Zn2+ ions at the separator-anode interface, facilitating stable and uniform Zn nucleation and growth. Moreover, the electrostatic interaction between the negatively charged functional groups and Zn2+ ions enhanced the Zn2+ ion transport kinetics, preventing the Zn dendrites formation and adverse reactions. Consequently, the modified electrolyte-filled GF separator showed an increased Zn2+ ion transference number of 0.65. The symmetric Zn//Zn batteries utilizing such a separator achieved an impressive cycling life of 500 h at a high current density/capacity of 10 mA cm-2/4 mAh cm-2, nearly nine times longer than the battery using the unmodified GF separator (<55 h). The superior electrochemical performance was verified in both Zn//AC and Zn//LiMn2O4 full battery evaluations. This work presents a novel synergistic modification strategy for developing advanced separators for aqueous ZIBs.

Coevolution combined with molecular dynamics simulations provides structural and mechanistic insights into the interactions between the integrator complex subunits.

Finding the 3D structure of large, multi-subunit complexes is difficult, despite recent advances in cryo-EM technology, due to remaining challenges to expressing and purifying subunits. Computational approaches that predict protein-protein interactions, including Direct Coupling Analysis (DCA), represent an attractive alternative for dissecting interactions within protein complexes. However, they are readily applicable only to small proteins due to high computational complexity and a high number of false positives. To solve this problem, we proposed a modified DCA approach, a powerful tool to predict the most likely interfaces of protein complexes. Since our modified approach cannot provide structural and mechanistic details of interacting peptides, we combine it with Molecular Dynamics (MD) simulations. To illustrate this novel approach, we predict interacting domains and structural details of interactions of two Integrator complex subunits, INTS9 and INTS11. Our predictions of interacting residues of INTS9/INTS11 are highly consistent with crystallographic structure. We then expand our procedure to two complexes whose structures are not well-studied: 1) The heterodimer formed by the Cleavage and Polyadenylation Specificity Factor 100-kD (CPSF100) and 73-kD (CPSF73); 2) The heterotrimer formed by INTS4/INTS9/INTS11. Experimental data supports our predictions of interactions within these two complexes, demonstrating that combining DCA and MD simulations is a powerful approach to revealing structural insights of large protein complexes.

A tool kit of highly selective and sensitive genetically encoded neuropeptide sensors.

Neuropeptides are key signaling molecules in the endocrine and nervous systems that regulate many critical physiological processes. Understanding the functions of neuropeptides in vivo requires the ability to monitor their dynamics with high specificity, sensitivity, and spatiotemporal resolution. However, this has been hindered by the lack of direct, sensitive, and noninvasive tools. We developed a series of GRAB (G protein-coupled receptor activation‒based) sensors for detecting somatostatin (SST), corticotropin-releasing factor (CRF), cholecystokinin (CCK), neuropeptide Y (NPY), neurotensin (NTS), and vasoactive intestinal peptide (VIP). These fluorescent sensors, which enable detection of specific neuropeptide binding at nanomolar concentrations, establish a robust tool kit for studying the release, function, and regulation of neuropeptides under both physiological and pathophysiological conditions.

Engineering Copper-Containing Nanoparticles-Loaded Silicene Nanosheets with Triple Enzyme Mimicry Activities and Photothermal Effect for Promoting Bacteria-Infected Wound Healing.

Skin wounds accompanied by bacterial infections threaten human health, and conventional antibiotic treatments are ineffective for drug-resistant bacterial infections and chronically infected wounds. The development of non-antibiotic-dependent therapeutics is highly desired but remains a challenging issue. Recently, 2D silicene nanosheets with considerable biocompatibility, biodegradability, and photothermal-conversion performance have received increasing attention in biomedical fields. Herein, copper-containing nanoparticles-loaded silicene (Cu2.8 O@silicene-BSA) nanosheets with triple enzyme mimicry catalytic (peroxidase, catalase, and oxidase-like) activities and photothermal function are rationally designed and fabricated for efficient bacterial elimination, angiogenesis promotion, and accelerated wound healing. Cu2.8 O@silicene-BSA nanosheets display excellent antibacterial activity through synergistic effects of reactive oxygen species generated from multiple catalytic reactions, intrinsic bactericidal activity of released Cu2+ ions, and photothermal effects, achieving high antibacterial efficiencies on methicillin-resistant Staphylococcus aureus (MRSA) of 99.1 ± 0.7% in vitro and 97.2 ± 1.6% in vivo. In addition, Cu2.8 O@silicene-BSA nanosheets exhibit high biocompatibility for promoting human umbilical vein endothelial cell (HUVEC) proliferation and angiogenic differentiation. In vivo experiments reveal that Cu2.8 O@silicene-BSA nanosheets with synergistic photothermal/chemodynamic therapeutics effectively accelerate MRSA-infected wound healing by eliminating bacteria, alleviating inflammation, boosting collagen deposition, and promoting angiogenesis. This research presents a promising strategy to engineer photothermal-assisted nanozyme catalysis for bacteria-invaded wound healing.